| Model No. | TES-FG60-IPC200 |
| Camera | |
| Image Sensor | 1/2.8” Pgogressive Scan CMOS |
| Min.Illumination | 0.02Lux @ (F2.0, AGC ON), 0Lux with IR |
| Shutter Time | 1/3~1/100,000 s |
| Lens | 4mm |
| Day & Night | ICR Infrared filter with auto switch |
| Backlight Compensation | Support |
| DNR | 3D-DNR |
| Wide Dynamic Range | Digital WDR |
| Motion Detection | on/off/ sensitivity adjustment |
| Network | |
| Video Compression | H.264 |
| Max. Image Resolution | 1920x1080@30fps; 720x480@30fps; 360x240@30fps; Capturing: 2048*1536 JPG |
| Frame Rate | 50Hz: 25fps(1280*960), 25fps(1280*720) |
| Image Setting | Saturation, Brightness, Contrast adjustable by client software or web browser |
| Smart Alarm | Motion Detection |
| A Key Configuration | Find IP via access outer net |
| General Function | Anti-Flicker, heartbeat, mirror, password protection |
| Wireless Standard | IEEE802.11b, 802.11g |
| Frequency Range | 2.1GHz~2.4835GHz |
| Channel Bandwidth | Support 20MHz |
| Security | 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK |
| Transmission Rate | 11b:11Mbps, 11g:54Mbps |
| Alarm | |
| RF Alarm Frequency | 868.4MHZ EU, 908.4MHZ US, 921.4MHZ ANZ, 869.2MHZ RU |
| RF Distance | Indoor 50m, outdoor 100m |
| Support Alarm Sensor | Support door magnet and PIR alarm |
| GPIO | 1 GPIO |
| PIR | Built-in 3pcs PIR sensor layout |
| Interface | |
| Storage Interface | Micro SD Card (MAX 128GB) |
| Power Interface | Micro USB interface |
| Communication Interface | 1 RJ45, 10/100M |
| General | |
| Working Temerature | -10° C ~ +45° C |
| Working Humidity | Less than 90% RH |
| Power Supply | 12V, 5A |
| IR Range | 10~15 m |
| Dimension | 230*230*60 mm |
