1. Video signal test
The new HD coaxial tester, built-in high definition 3.5”LCD-TFT 480（RGB）x320 resolution, view the image, easy and directly displays the camera image, support PAL/NTSC LCD screen Brightness/Contrast/Color Saturation adjustable. Suitable for field construction and maintenance work.
2. HD coaxial signal test
TVI, CVI, AHD coaxial signal test, the tester will display camera image, coaxial PTZ control and call up the camera OSD menu.
3. Video signal level test (Not for TVI CVI AHD test)
Test video signal strength attenuation, longer video signal cable will cause the image to be dim, and reduce the image dynamic range, video signal is too strong, it will cause the virtual shadow, and reduce the sharpness of the image. It also can real-display the video level value, if out of range, notices will be display in the screen.
4. PTZ controller
Display the input video images. Pan/tilt the P/T unit and zoom in/out the image. Setup the controlling parameters like protocol, communication port, baud rate, PTZ ID, pan/tilt speed; set and call preset position.
5. Enhanced color bar generator
The tester sends out color bars via its BNC output to the monitor. This is used to test for a problem in the cable going from the camera back to the monitoring area.
6. DC12V 1A output power
Power the camera with DC12V (1A) power output from the tester. It is helpful for demo and testing when the power supply is not available.
7. Audio testing
Test the audio input from pickup devices. Connect the tester and pickup device with the audio cable.
8. Cable tester
Test LAN cable or telephone cable. Connect LAN cable or telephone cable with the HD coaxial tester and cable tester. And then the connecting status, cable type and the sequence of wires will be displayed, as well as the serial number of the cable tester kit.
9. PTZ controller
Search the Control protocol code from Multifunction keyboard or DVR by RS485 /RS232 interface, test the PTZ control command data whether received anomaly and RS485/RS232 data transmission.
Screen displays 16 hexadecimal codes such as
PELCO-P: A0 00（Add） xx xxxxxx AF xx
PELCO-D: FF 01（Add）xx xxxxxxxx
10. PTZ address scanning
Search up the ID of PTZ camera. Help the engineer search the speed dome address quickly.
11. Cable scan (Optional) *
Send the specific signal, easy to find the connected cable from the mess cable.
12. Visual fault locator * (Optional)
Visual Fault Locator with 650nm wavelength can emit red laser sources to test multi-mode and single mode fiber’s bending and breakage, and Continuous light-emitting and 1Hz, 2Hz modulating light output. It is indispensable tool in fiber project constructing, fiber net-work maintaining, optical component manufacture and research.
13. Digital multimeter (Optional)*
HD coaxial tester built in highly stable and reliable 33/4 digit (6600) digital multimeter. It is used for the DC and AC voltage measurement, AC and DC current measurement, Resistance measurement, Continuity test, Diode measurements, Capacitance measurement, Auto/Manual measuring range switching, relative value measurement and locking. It is easy operation and professionally accurate.
14. LED lamp
Press the LED On/Off button to use the LED flashlight.
15. HD coaxial, PTZ control and color bar generator shortcut key
HD coaxial, PTZ control and color bar generator shortcut key, easy to operate.
16. F1, F2 User-defined shortcut keys
The user-defined shortcut key is designed for improving the efficiency for the engineer, anytime press, easy to operate.
17. TDR cable test * (Optional)
TDR cable testing, accurately measure BNC cable, network cable, controls cable's open circuit and short-circuits location. It greatly improves working efficiency.
18. Optical power meter, test fiber loss and value * (Optional)
The IP camera tester adopts the most advanced handheld instrument specific integrated chip, achieve ultra-low power operation, with the TFT-LCD High-definition screen display, five wavelength calibration points 1625nm,1550nm,1490nm,1310nm,1300nm,850nm. Linear or nonlinear optical power display, it can measure the optical power value, and also be used for Relative measurement of optical fiber link loss.
